Ball mill Machine
1. Low power consumption
2. Reliable working condition
3. High efficiency
4. Long service life
Ball mill is crucial equipment for grinding after materials are crushed. It is an efficient tool for grinding various materials into powder. There are two ways of grinding: The dry process and the wet process. It can be divided into tabular type and flowing type according to different forms of discharging material.
Ball Mill Machine application:
Ball mill is key equipment for regrinding. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc. Our ball mill can grind ore or other materials that can be grinded either by wet process or by dry process.
Ball mill Features and benefits:
This ball mill machine is made up of feeding part, discharging part, gyre part, transmission part, (decelerator, small transmission gear, generator, electrical control) and so on. The hollow axis adopts the cast steel and the lining can replace, the rotating big gear processes in the way of casting rolling gear. The barrel body is wearable well and bears wearable scaleboard. This machine run steadily and works reliably.
Working Principle Of Ball Mill
This machine is a horizontal type cylinder rotary device and outside the cylinder there is drive gear which drives the cylinder to rotate during the working process. Materials spirally and evenly go into the first cabin of the grinding machine through the feeding hollow shaft from the feeding device, and inside the first cabin, there are ladder lining boards or ripple lining board in which there are many steel balls with different specifications. The cylinder rotates and produces eccentric force to bring the steel balls to a certain height, and then the steel balls will fall down to impact and grind the materials. After being coarsely ground in the first cabin, the materials will go through the singlelayer partition board and into the secondary cabin in which there are flat lining board, and in the lining board there are steel balls to further grind the materials. Finally the powdery materials will be discharged from the discharging grating bar to complete the powder grinding process.
Specification of Ball Mill
| Model |
Speed of bucket
(r/min) |
Weight
Of ball |
Size of
Feed opening(mm) |
Size of outputting
Feed (mm) |
Production
(t/h) |
Power
(kw) |
Weight
(T) |
| 900× 1800 |
38 |
1.5 |
≤ 20 |
0.075-0.89 |
0.65-2 |
18.5 |
3.6 |
| 900× 3000 |
38 |
2.7 |
≤ 20 |
0.075-0.89 |
1.1-3.5 |
22 |
4.6 |
| 1200× 2400 |
32 |
3.8 |
≤ 25 |
0
075-0.6 |
1.5-4.8 |
45 |
12.5 |
| 1200× 3000 |
32 |
5 |
≤ 25 |
0.075-0.4 |
1.6-5 |
45 |
12.8 |
| 1200× 4500 |
32 |
7 |
≤ 25 |
0.075-0.4 |
1.6-5.8 |
55 |
13.8 |
| 1500× 3000 |
27 |
8 |
≤ 25 |
0.075-0.4 |
2-5 |
90 |
17 |
| 1500× 4500 |
27 |
14 |
≤ 25 |
0.075-0.4 |
3-6 |
110 |
21 |
| 1500× 5700 |
27 |
15 |
≤ 25 |
0.075-0.4 |
3.5-6 |
132 |
24.7 |
| 1830× 3000 |
24 |
11 |
≤ 25 |
0.075-0.4 |
4-10 |
180 |
28 |
| 1830× 6400 |
24 |
23 |
≤ 25 |
0.075-0.4 |
6.5-15 |
210 |
34 |
| 1830× 7000 |
24 |
25 |
≤ 25 |
0.075-0.4 |
7.5-17 |
245 |
36 |
| 2200× 5500 |
21 |
30 |
≤ 25 |
0.075-0.4 |
10-22 |
370 |
48.5 |
| 2200× 6500 |
21 |
30 |
≤ 25 |
0.075-0.4 |
14-26 |
280 |
52.8 |
| 2200× 7500 |
21 |
33 |
≤ 25 |
0.075-0.4 |
16-29 |
475 |
56 |
Audited Supplier 
){kind=link}
){kind=link}