We provide the whole service of cement production line's design and manufacture and installation. Cement production line EPC project or parts equipment. We design and manufacture devices for new type dry method cement production line, which capacity from 300t/d to 1500t/d clinker.
In the whole cement production line, rotary kiln is the main equipment for sintering cement clinker. The rotary kilns produced by our company can be divided into dry process and wet process. They can also be used for chemical industry, metallurgy industry and etc. Throught technical renovations, the rotary kiln sintering system equipment made by our company has adopted high measuring precession plunger pump, variable speed adjusted valve, contact graphite block air seal and other national advanced technologies.
Main characterisitcs of dry-process cement production line:
1) This dry process cement production line adopts advanced technology and equipment of current cement industry. With the advanced technology and dependable equipment, great economy benefits can be acquired.
2) The high-efficiency low-resistance five-stage cyclone pre-heater and cdc furnace system with high gas adaptability, high classification efficiency, high heat exchanging efficiency and low system resistance will be adopted at the kiln inlet, so as to increase the output of clinker.
3) New technology will be adopted at the rotary kiln head.
4) In the raw meal grinding section, air swept drying mill is adopted. The raw material is dried by waste heat from the kiln inlet to save energy and investment.
5)According to technology requirements of the new dry process rotary kiln, advanced computerized dcs control system is adopted for the control of main production parts from bottom of raw material blending silos to top of cement silos. And PLC control system is adopted for other parts.
6) Great importance has been attached to the environment protection in the plan. In order to measure up to the environment protection standard, advanced and practicable dust collectors are adopted at all dust generating points.
| cement rotary kiln |
| type(mm) |
indiclination(%) |
rotation speed(r/min) |
input tempreture(ºC) |
motor power(kw) |
outpur(t/h) |
weight(t) |
| GZΦ800×8000 |
5 |
7.5 |
≤700 |
4-6 |
0.8-2.0 |
3.5 |
| GZΦ1000×10000 |
5 |
6.19 |
≤700 |
5.5-7.5 |
1.0-3.5 |
5.6 |
| GZΦ1200×10000 |
5 |
5.3 |
≤700 |
11-13 |
1.8-5 |
14.04 |
| GZΦ1500×12000 |
5 |
4.5 |
≤800 |
13-15 |
3.3-7.5 |
17.76 |
| GZΦ1800×14000 |
5 |
3.3 |
≤800 |
18.5 |
5-9 |
29 |
| GZΦ2200×120000 |
5 |
3 |
≤700 |
22 |
6-12 |
33 |
| GZΦ2400×18000 |
5 |
2.5 |
≤800 |
30 |
10-15 |
53.3 |
Cement production line Advantages:
1.Easy to set-up,operate and adjust,customizable;
2.Pre-sales: R&D and consulting support;
3.After-sale: skills training & spare parts support;
4. High reliability;
5.Simple structure and easy to operate;
6.Easy replacement of wear and spare parts;
7.Long service time;
8.High efficiency;
9.Wide ranges of choices;
Audited Supplier 
){kind=link}
){kind=link}