Screw Conveyor Silo Conveyor Screw Conveyor For Cement Silo
Screw Conveyor
1. Screw Conveyor has larger loat capacity
2. Easy maintenance
3. Dependable performance
4Conveyor costs economy
5. Easy operate
Screw Conveyor's advantage
1, simple structure, cross-section size is small, the cost of the end;
2, The middle of loading and unloading easy;
3, Simple operation;
4, conveyoring materials from the outside world, good seal.
Working Principle and Structure
A screw conveyor, usually by spiral machine, feeding system, drive device. The company does not supply switch and motor startup device. Screw machine body consists of a header section, in the middle section, the tail section consists of three parts. Under normal circumstances, when the factory-installed in the middle section of the sequence by the length of length, the longest section near the middle of the head section of the same length of the middle section is after, if you have special requirements, in order to arrange the order given. In the header section is equipped with a thrust bearings are subjected to axial force, in the middle section and tail section within the bearing screw shaft, moreover, in the tail section also with axial movement of the radial bearing to compensate for the screw shaft length error and adapt to the changes of temperature.
The helicoid form has the entity screw (the S facture) and the belt screw (the D facture) two kinds. Between various screw shafts uses the flange type joint, had guaranteed universal jointed shaft's interchangeability, is advantageous for the service. The canopy buckles the clamp for the tile type and with the lid on the cabinet, if must improve the sealing property, the user may voluntarily adds the waterproof canvas duck between the canopy and the cabinet. The charging device has the feed head, leaves the material installment discharge hole, the hand pushes the type discharge hole and the rack type discharge hole three kinds in the right way. Is using the scene by the user to weld in organism upper shed. Arranges, when the discharge hole position should pay attention to the guarantee material mouth to the nose distance, simultaneously avoids the material mouth and the suspension bearing, the collar oiler, the cabinet, the joint flange, the foundation and so on bumps. Drive unit with ZQ series reducer + Y series motors, YTC gear reducer.
Screw conveyor with a compact structure, cross-sectional area of small, lightweight, good airproof performance, high transmission efficiency, process flexibility in layout, equipment, demolition, mobile convenience and in safe working order. Applicable to transport all kinds of power, granular, small block of bulk materials, such as the clay powder, coal, cement, sand, grains, small lump coal, gravel, such as cast iron. Not suitable for viscous transport, and easy to agglomerate, perishable materials. The form of screw conveyor according to the level of configuration, tilt, and the form of portfolio and work with other transportation device used to complete the set operation, distribution, whip, mixing, dehydration, set list of ingredients, dumping of cut-off, etc. stacking operation. This product is suitable for bulk cement transportation from cement bin to stirring machine or to dosing machine in concrete batching plant.
| GX-Type Screw ConveyorMain Technical Parameters |
| Spec model |
Screw dia
|
revolution
(r/min) |
Top output
(t) |
motor
(kw) |
| <5m |
5-10m |
10-15m |
15-20m |
| GX150 |
150 |
66 |
2.75 |
1.5 |
2.2 |
3 |
4 |
| GX400 |
400 |
41 |
12.8 |
5.5 |
7.5 |
11 |
15 |
| GX500 |
500 |
41 |
16.9 |
7.5 |
11 |
15 |
18.5 |
LS-TYPE Screw Conveyor Main Technical Parameters |
| Spec model |
Screw dia
|
pitch |
Top rev |
Top output(m³/h) |
| Fill coefficient |
| Φ=0.45 |
Φ=0.33 |
Φ=0.15 |
| LS100 |
100 |
100 |
140 |
3 |
2.2 |
1 |
| LS500 |
500 |
400 |
63 |
133.2 |
97.7 |
44.4 |
| LS1250 |
1250 |
630 |
25 |
520.5 |
381.7 |
173.5 |
Audited Supplier 
){kind=link}