| Customization: | Available |
|---|---|
| Certificate: | ISO9001,ISO14000 |
| Application: | Lime Production Line |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Rotary kiln is the main equipment for sintering cement clinker. The rotary kilns produced by our company can be divided into dry process and wet process.
We can supply Pengfei brand rotary kiln (titanium pigment kiln, sintering furnace, industrial furnace, kiln, acid pellet) made by ZK Mining Machinery Co., Ltd. whose specifications are
Φ3.2×52m,Φ3.5×54m,Φ4.0×60m,Φ4.3×64m,Φ4.8×74m and Φ5.0×78m and used for 8000tpd, 5000tpd and 2500tpd new dry basis complete rotary kiln equipments. Pengfei brand rotary kiln is the main equipment for calcining cement clinker and it can be used widely for cement industry, metallurgy industry, chemical industry, etc. The rotary kiln is composed of the shell, the supporting device, the supporting device with thrust roller, the driving device, the movable kiln head, the sealing device at kiln tail, the combustion device, etc. It has the simple structure and reliable operation, at the same the production process of the rotary kiln can be controlled easily.
Through the technical renovations, the rotary kiln calcining system equipment made by ZK has adopted the advanced hydraulic thrust roller device, the high measuring precession plunger pump, the variable speed adjusted valve, the contact graphite block sealing device and the other national advanced technologies. In order to raise up automation degree, the industrial TV has been used at the kiln head for monitoring of kiln, the simulation phosphor screen has been used for display of process flow; the infrared scanning system has been adopted for calcining zone to directly reflect the burning conditions on the computer. With the use of these new of these new technologies, it is direct in vision, convenient in operation and reliable in use. Therefore, the thermal condition can be stabilized and the running rate of equipment can be raised. Compared to same sized equipment, its running rate has been raised 10% up, production has been increased 5% to 10% and heat consumption has been reduced 15% down.
Product features:
1. Support device: advanced shaft structure, automatic temperature measuring device and electrical heating.
2. Catch wheel: including two kinds mechanical wheel and hydraulic pressure.
3. Gears: single or double. Control the rotating speed by variable motor, DE machine and frequency variable motor. Be reliable, energy -saving, and efficient.
4. Cylinder tyre bolster: lower bolster has three types: fixed, zoom and floating. The structure is simple, replacement is convenient and won't hurt cylinder.
5. Sealing equipment: there are many kinds for choice according to kiln models, including air cylinder edge sealing, spring edge sealing, and graphite block sealing and combination for above. The feather is adaptive for cylinder rotating and swing. And sealing effect is very good.
6. Kiln head hood: including stationary type and flexible type.
Our company produces other rotary kilns with the diameter1-5 meters, widely applies in the metallurgy, the chemical industry, bears professions and so on material, Ceram site, papermaking. This kind of kiln's supporting is divided into two forms of rolls and skids, the transmission may use direct-current or the exchange frequency conversion velocity modulation, and has many kinds of form seals to adapt the different operating mode.
Lime roatry kiln's specification:
| spec (m) | technical parametere | speed reducer | motor | supporting quantity | |||
| rev (r/min) | slope (%) | output (t/h) | type | type | power (KW) | ||
| Φ1.6x32 | 0.58~2.85 | 4 | 2 | ZQ75-50 | YCT250-4A | 18.5 | 3 |
| Φ1.6/1.9x36 | 0.53~1.59 | 4 | 2.5~3 | ZQ110-7 | YCT250-4B | 22 | 3 |
| Φ1.9x39 | 0.53~1.59 | 4 | 3~3.4 | ZQ125-7 | YCT315-4A | 37 | 3 |
| Φ2.2x45 | 0.214~1.64 | 3.5 | 4~5 | main:ZS125-5 | YCT315-4B | 45 | 3 |
| auxiliary:ZQ40-40 | Y112M-4 | 4 | |||||
| Φ2.5x50 | 0.62~1.5 | 3.5 | 5~6 | main:ZS165-5 | YCT355-4A | 55 | 3 |
| auxiliary:ZS50-1 | Y160M-6 | 7.5 | |||||
| Φ2.5x55 | 0.62~1.5 | 3.5 | 5~6 | main:ZS165-5 | YCT355-4A | 55 | 3 |
| auxiliary:ZS50-1 | Y160M-6 | 7.5 | |||||
| Φ2.8x55 | 0.62~1.5 | 3.5 | 6~7 | main:ZS165-6 | YCT355-4B | 75 | 3 |
| auxiliary:ZS50-1 | Y160L-6 | 11 | |||||
| Φ3.0x60 | 0.5~1.5 | 3.5 | 7~9 | main:ZS165-3 | ZSN-280-11B | 125 | 4 |
| auxiliary:ZS50-1 | Y160L-6 | 11 | |||||
| Φ3.2x64 | 0.4~1.5 | 3.5 | 8~10 | main:ZL130-16 | ZSN-280-11B | 190 | 4 |
| auxiliary:ZL50-10 | Y180L-4 | 22 | |||||
| Φ3.5x70 | 0.4~1.5 | 3.5 | 12~14 | main:ZSY500-40 | ZSN-315-082 | 280 | 4 |
| auxiliary:ZL50-14 | Y180L-4 | 22 | |||||
| Φ4x80 | 0.4~1.5 | 3.5 | 16~20 | main:ZSY630-35.5 | ZSN-315-12 | 355 | 4 |
| auxiliary:ZSY280-35.5 | Y200L-4 | 30 |
|||||
In order to save your time ,can you tell me the following time below before send us the inquiry so that we can give you a more suitable quotation and improve our efficiency .
1. What's material is to be calcined?
2. What the capacity do you need?
3. What's the fuel is for calcining?
Welcome for your inquire and visit!
){kind=link}