Energy Saving Jaw Crusher non-Ferrous Minerals Ore Crusher Machine
Jaw crusher is widely used for crushing various materials like lime stone, granite, calcite, dolomite, manganese ore, iron ore, gypsum, calcium carbonate, feldspar etc with crushing compression strengh no more than 320MP. Used as primary crushing part, the Jaw Crusher can be used in the area of mining, construction, road and railway building, metallurgical industry, chemistry industry etc.
PE series jaw crusher is used for coarse crushing different kinds of ores and rocks, and PEX series jaw crusher is used for intermediate and fine crushing.
Application of Jaw Crusher:
Be applied in large block of material crushing in mining industry, metallurgical industry, construction industry, highway, railway, water, and chemical industry
Working Principle of Jaw Crusher:
The Power Motor transmits power through Belt, drives the Moving Jaw Plate do periodic motion to the Fixed Jaw Plate surround the Eccentric Shaft. The angle between Toggle Plate and Moving Jaw Plate increases when Moving Jaw Plate moves up. So the Moving Jaw Plate closes to the Fixed Jaw Plate. The stuff will be crushed in this process. The angle between Toggle Plate and Moving Jaw Plate decreases when Moving jaw Plate moves down, the Moving Jaw Plate moves away from Fixed Jaw Plate by the pulling of Rod and Spring, the crushed material will be discharged from the Discharge Opening.
Jaw Crusher Structure:
PE, PEX series jaw crusher is mainly consist of frame, eccentric shaft, pulley, side guard plate, bracket, discharging gate adjusting device, fixed jaw plate, movable jaw plate, safety device and etc. And its main structural features are as following:
1,Frame
It mainly is consist of side panels, front box assembly, rear box, and etc;
2,Eccentric Shaft Rotating Part
It mainly is consist of movable jaw, eccentric shaft, bearings, bearing pedestal, belt pulleys and etc., and it is the major part for dynamic transmission;
3,Crushing Cavity Working Part
It mainly is consist of fixed jaw plate, movable jaw plate, side liners, guard board and etc., and it is the working parts for breaking materials;
4,Safety Device
It is consist of bracket, bracket base, spring, spring rod and etc., and it is the parts that play a security role during crusher works in an abnormal condition.
5,Discharging Gate Adjusting Device
It is mainly consist of adjusting fixed ramp, adjusting sliding ramp, top wire bolt, slide locking lever, and etc., it is used to adjust the size of the discharging gate and to control the discharging particle size.
| Model |
Feed Opening (mm) |
Max. feeding size (mm) |
Adjusting range of discharge opening (mm) |
Capacity (t/h) |
Rotation speed of eccentric shaft (r/min) |
Motor power (kw) |
Total weight (t) |
Dimensions (L*W*H)(mm) |
| PE-150*250 |
150*250 |
125 |
10-40 |
1-3 |
250 |
5.5 |
0.8 |
720*660*850 |
| PE-200*300 |
200*300 |
180 |
15-50 |
2-6 |
260 |
7.5 |
1.2 |
910*750*990 |
| PE-200*350 |
200*350 |
180 |
18-70 |
3-10 |
260 |
11 |
1.5 |
1000*870*990 |
| PE-250*400 |
250*400 |
210 |
20-60 |
5-20 |
300 |
15 |
2.8 |
1300*1090*1270 |
| PE-400*600 |
400*600 |
340 |
40-100 |
16-60 |
275 |
30 |
7 |
1730*1730*1630 |
| PE-500*750 |
500*750 |
425 |
50-100 |
40-110 |
275 |
55 |
12 |
1980*2080*1870 |
| PE-600*750 |
600*750 |
500 |
150-200 |
80-240 |
275 |
55 |
15.8 |
2070*2000*1920 |
| PE-600*900II |
600*900 |
500 |
65-160 |
50-180 |
250 |
55 |
17 |
2190*2206*2300 |
| PE-750*1060 |
750*1060 |
630 |
80-140 |
110-320 |
250 |
110 |
29 |
2660*2430*2800 |
| PE-800*1060 |
800*1060 |
640 |
130-190 |
130-330 |
250 |
110 |
29.8 |
2710*2430*2800 |
| PE-830*1060 |
830*1060 |
650 |
160-220 |
150-336 |
250 |
110 |
30.7 |
2740*2430*2800 |
| PE-870*1060 |
870*1060 |
660 |
200-260 |
190-336 |
250 |
110 |
31.5 |
2810*2430*2800 |
| PE-900*1060 |
900*1060 |
685 |
230-290 |
230-390 |
250 |
110 |
33 |
2870*2420*2940 |
| PE-900*1200 |
900*1200 |
750 |
95-165 |
220-450 |
200 |
110 |
52 |
3380*2870*3330 |
| PE-1000*1200 |
1000*1200 |
850 |
195-265 |
315-500 |
200 |
110 |
55 |
3480*2876*3330 |
| PE-1200*1500 |
1200*1500 |
1020 |
150-350 |
400-800 |
180 |
160 |
100.9 |
4200*3300*3500 |
| PE-1500*1800 |
1500*1800 |
1200 |
220-350 |
500-1000 |
180 |
280 |
122 |
5160*3660*4248 |
| PE-1800*2100 |
1800*2100 |
1500 |
300-400 |
600-1200 |
160 |
400 |
150.6 |
6210*4013*4716 |
| PEX-150*750 |
150*750 |
120 |
18-48 |
8-25 |
320 |
15 |
3.8 |
1200*1530*1060 |
| PEX-250*750 |
250*750 |
210 |
25-60 |
13-35 |
330 |
30 |
5.5 |
1380*1750*1540 |
| PEX-250*1000 |
250*1000 |
210 |
25-60 |
16-52 |
330 |
30 |
7 |
1560*1950*1390 |
| PEX-250*1200 |
250*1200 |
210 |
25-60 |
20-61 |
330 |
37 |
9.7 |
2140*1660*1500 |
| PEX-300*1300 |
300*1300 |
250 |
20-90 |
16-105 |
300 |
55 |
15.6 |
2720*1950*1600 |
FAQ:
Q: Are you a factory or a trading company?
A: We are factory manufacturing packaging machines and we provide perfect OEM and after-sale service.
Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine and uploaded them to Youtube.
Q: What should I take care when using the machine?
A: Keep the machine away from thinner and other chemical liquid.
Q: How to maintain the machine?
A: Check the connection part and clean the screen frame regularly.
Q: How can I pay my order?
A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.
Q: Do you have a CE certificate?
A: For every model of machine, it has a CE certificate.
Packaging Detail :
The main machinery is in nude packing and spare parts in Wooden or steel box standard export packing, suitable for long distance delivery.
Audited Supplier 
){kind=link}
){kind=link}