| Customization: | Available |
|---|---|
| Condition: | New |
| Testing: | We Offer |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
It is mainly used to govern the dust pollution and recycle the materials of cement, chemical engineering, galvanization, mine, waste incineration, differentiation, chemical fertilizer, stonework, tobacco, wine making, food processing.
Characteristics of builder hoist:
1.Wide range of application. This series of dust collector can be used to govern dust pollution of various industries and various environments.
2.Reasonable structure design, small floor space, low investment, convenient operation, reliable and stable running, high gas processing capacity, high dusting efficiency, high material recycling.
3.International advanced dusting technology. It can choose filter bags with different standards and properties. Filter bags are not sticky, not condensing with low energy consumption and long service life.
4.Improving the atmospheric conditions of the body device and working environment of the powder with complex compositions and strong corrosion resistance.
Operating principle of builder hoist:
1.gas purification process: Gas with dust get into filter chamber through air inlet. Coarse dust particles due to inertial impaction, natural sedimentation and dust box, fine dust rose into the air with each filter chamber under negative pressure of the wind, the outer barrier attached to the bag and was purified gas from the outlet discharge.
2.Soot cleaning process: Issued by the electronic control system control
signals, by incorporating gas system to complete, due to the use of sub-chamber structure, by-room cleaning, so much so that dust is always in the room to work, room cleaning status guarantees a filtration resistance stability
| Model | Transmission capacity(m3/h) | Hopper | Shaft speed(r/min) | Largest block of conveying material | Lift height(m) | |||||
| Deep bucket | Shallow bucket | capacity(L) | bucket Distance(mm) | bucket width(mm) | Running speed(r/min) | (mm) | ||||
| Deep bucket | Shallow bucket | |||||||||
| HL160 | 6 | 2.2 | 1.1 | 0.65 | 400 | 160 | 0.87 | 47.5 | 25 | 4.84-30.02 |
| HL250 | 14 | 6.8 | 3.2 | 2.6 | 500 | 250 | 0.87 | 47.5 | 35 | 4.84-30.08 |
| HL300 | 28 | 16 | 5.2 | 4.4 | 500 | 300 | 1.25 | 37.5 | 40 | 4.66-30.16 |
| HL400 | 47.2 | 30 | 10.5 | 10 | 600 | 400 | 1.25 | 37.5 | 50 | 4.52-30.32 |
){kind=link}