Copper Ore Flotation Equipment of Ore Dressing Plant Flotation
1. Reasonable structure
2. Reliable performance
3. High efficiency
4. Low consumption
Introduction Of Copper Ore Floatation Equipment
Floatation Equipment is applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry.
Features of Copper Ore Floatation Equipment
The Floatation Equipment has the advantages of large air-absorption capacity and low energy consumption. Every cell owns three function: Air absorption, slurry absorption, and flotation separation, and the cells form a flotation separation loop by itself without any auxiliary equipment, and is allocated horizontally, which favors the change of flow.
The circulation of mineral slurry is reasonable, and can avoid the disposition of coarse sand to the largest extent. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurry respectively.
Working Principle of Copper Ore Floatation Equipment
The impeller is driven by V-belts, which can bring the centrifugal effect to form negative pressure. With extracting sufficient air to mix with ore pulp, the machine stirs ore pulp and mixes it with chemicals to form mineralized froth. By adjusting the height of the flash board to control the liquid level, the useful froth can be scraped from the loam board.
The height of the strobe must be adjusted carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a distance and should be changed when worn. The bearing in the pump should be maintained every three months.
| Model |
Volume |
Cell size |
Impeller Dia. |
Impeller speed |
Capacity |
Power |
Ssinge cell weight |
| m3 |
mm |
mm |
r/min |
m3 /min |
kw |
kg |
| XJ-3 |
0.35 |
700*700*700 |
300 |
483 |
0.18-0.4 |
2.2/0.55 |
430 |
| XJ-6 |
0.62 |
820*900*850 |
350 |
400 |
0.3-0.9 |
3/1.1 |
755 |
| XJ-11 |
1.1 |
1100*1100*1100 |
500 |
330 |
0.6-1.6 |
5/1.1 |
1416 |
| XJ-28 |
2.8 |
1750*1600*1100 |
600 |
280 |
1.5-3.5 |
11/1.1 |
2113 |
| XJ-58 |
5.8 |
2200*2200*1200 |
750 |
240 |
3-7 |
22/1.5 |
3400 |
| SF-0.37 |
0.37 |
700*700*700 |
296 |
386 |
0.2-0.4 |
1.5/0.55 |
468 |
| SF-0.7 |
0.7 |
820*900*950 |
350 |
400 |
0.3-0.9 |
3/1.1 |
805 |
| SF-1.2 |
1.2 |
1100*1100*1100 |
450 |
312 |
0.6-1.2 |
5.5/1.1 |
1373 |
| SF-2.8 |
2.8 |
1750*1600*1150 |
550 |
268 |
1.5-3.5 |
11/1.5 |
2138 |
| SF-4 |
4 |
1850*2050*1200 |
650 |
220 |
2-4 |
15/1.5 |
2582 |
| SF-8 |
8 |
2200*2900*1400 |
760 |
191 |
4-8 |
30/1.5 |
4129 |
| SF-10 |
10 |
2200*2900*1700 |
760 |
191 |
5-10 |
30/1.5 |
4486 |
| SF-16 |
16 |
2850*3800*1700 |
760 |
191 |
5-16 |
30*2/1.5 |
8320 |
| SF-20 |
20 |
2850*3800*2000 |
760 |
191 |
5-20 |
30*2/1.5 |
9828 |
Audited Supplier 
){kind=link}