Bucket Elevator for Ceramic Sand Production Line
Product Introduction:
Bucket elevator is composite by the shell, traction parts (chain), hopper, driving wheel (head wheel), bend wheel (tail wheel), tensioner, guider, feeding end (inlet) and the discharge end (outlet).
A, cylindrical bucket: Deep bucket, bucket opening was 65 º Tilt, high depth, and for drying, good flow, for good scattered granular material delivery
Shallow bucket: Opening was 45 º Tilt, low depth, for mobility and wet granular materials.
B, angular bucket: The side extent out the end board to form guard board, when discharging, the material flow along the guard board and floor, for the delivery of viscosity, large and heavy block of bulk materials
Traction parts
(A) rubber belt: Flexible gasket fixed with screws and connected to the belt end, with bucket width more than 35 ~ 40mm, generally belt can deliver materials no more than 60 degree celsius, heat-resistant belt can reach 150 degree celsius.
(B) chain: The single chain connected to the back board of hopper;
The double chains connect on both sides of the hopper board. Chain bucket elevator applies single chain when the bucket width is 160 ~ 2500mm, and applies double chains when the bucket width is 320 ~ 630mm, the main drawback of chain bucket elevator is high wear and frequency maintenance.
Features and Benefits:
The dive power is small; To adopt inflow feeding, induction discharge. Large capacity bucket by intensive layout. Seldom return material and excavating.
2. Widely working range. It has fewer requests on materials, not only suitable for powder, granular, but enhances the high-mill cut materials and tightness, less environmental pollution.
3. Operating reliability. It has an advanced design principles and processing methods to ensure the reliability of machine operation, trouble-free time more than 20 thousand hours, high lift height, running smoothly, so it can upgrade to a higher height.
4. Long service life. Elevator adopted take into feeding style, without using bucket excavating, rare compression and collision between materials. This machine is designed to ensure that the material few scattered when feeding & discharging, and reducing mechanical wear.
Working principle:
The buckets scoop the material from the hopper, elevate them to the top and turn down after passing the head wheel, then discharge the material to the hoper. The bucket elevator with transmission mainly applies rubber belt which set on the transmission cylinder. The chain bucket elevator mainly has two parallel transmission chains. On end has the transmission chain wheel and the other end is bend wheel. The bucket elevator usually with shell to avoid dust spillage.
Company Name: Henan Zhengzhou Mining Machinery Co., Ltd.
Official Website: http://hnzkjq.en.made-in-china.com
24-hour Free Sales Consulting Phone: 861-0371 -5590 2866.
Company Address: Qiaolou caizhai industrial estate, Xingyang city, Henan Province
Please pay attention to the company's other products:
Price of rotary kiln: http://hnzkjq.en.made-in-china.com/calcining.html
Rotary Kiln:http://hnzkjq.en.made-in-china.com/calcining.html
Preheater: http://hnzkjq.en.made-in-china.com/calcining/8.html
Cement Mill: http://hnzkjq.en.made-in-china.com/grinding/17.html
Rotary Dryer: http://hnzkjq.en.made-in-china.com/calcining/116.html
Raw Mill: http://hnzkjq.en.made-in-china.com/grinding/16.html
Trommel Screen:http://hnzkjq.en.made-in-china.com/separating/137.html
Rotary cooler:http://hnzkjq.en.made-in-china.com/calcining/6.html
| Model |
Transmission capacity(m3/h) |
Hopper |
Shaft speed(r/min) |
Largest block of conveying material |
Lift height(m) |
| Deep bucket |
Shallow bucket |
capacity(L) |
bucket Distance(mm) |
bucket width(mm) |
Running speed(r/min) |
(mm) |
| Deep bucket |
Shallow bucket |
|
| HL160 |
6 |
2.2 |
1.1 |
0.65 |
400 |
160 |
0.87 |
47.5 |
25 |
4.84-30.02 |
| HL250 |
14 |
6.8 |
3.2 |
2.6 |
500 |
250 |
0.87 |
47.5 |
35 |
4.84-30.08 |
| HL300 |
28 |
16 |
5.2 |
4.4 |
500 |
300 |
1.25 |
37.5 |
40 |
4.66-30.16 |
| HL400 |
47.2 |
30 |
10.5 |
10 |
600 |
400 |
1.25 |
37.5 |
50 |
4.52-30.32 |
Our service:
Training & Service
Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment,
according to your special demand.
Sale services: servant
Send technicians to the jobsite for guiding the installation and adjustment, training operators
and finishing the check and accept together with you.
After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory?level of spare parts, which means the replacements can be shipped to you right away.
Welcome to visit our company and workshop, we sincerely look forward to cooperating with
you. We will provide you with the most suitable products with the reasonable price.
Audited Supplier 
){kind=link}