Hopper Screw Conveyor for Sale with ISO Approval

Product Description

Hopper Screw Conveyor for Sale with ISO Approval
 

Product Description

Screw conveyor is a kind of continuous conveying equipment without flexible traction mechanism. It mainly used to convey powder, granular and small lump material which is less viscous and hard blocking, such as coal, slag, cement, grain and etc. It can be widely used in building materials, chemicals, power, metallurgy, coal and other industries.


Application:
Screw conveyor generally used for continuity conveying bulk materials in short distance at horizontal or slightly oblique (angle β≤15 °) direction. It can mix and stir the material during conveying. The working environment is -20 ~ 50 ºC, and the material should be less than 200 ºC. Its design and fabrication meet the professional standards in JB/T7679-2008-"screw conveyor". The hanging bearing adopts the two structures of rolling and sliding interchangeable. It has low resistance, strong sealing and good wear resistance.

Working Principle and Structure:
A screw conveyor, usually by spiral machine, feeding system, drive device. The company does not supply switch and motor startup device. Screw machine body consists of a header section, in the middle section, the tail section consists of three parts. Under normal circumstances, when the factory-installed in the middle section of the sequence by the length of length, the longest section near the middle of the head section of the same length of the middle section is after, if you have special requirements, in order to arrange the order given. In the header section is equipped with a thrust bearings are subjected to axial force, in the middle section and tail section within the bearing screw shaft, moreover, in the tail section also with axial movement of the radial bearing to compensate for the screw shaft length error and adapt to the changes of temperature.

Technology Specifications: 

Model	Dia of Spiral Leaf (mm)	Screw Pitch (mm)	Rotating Speed (r/min)	Capacity (m³/h)	Weight
GLS100	95	80	71~140	1.1~2.2	Depending on the length
GLS150	142	120	50~64	1.5~3.5	Depending on the length
GLS250	245	200	50~80	10~20	Depending on the length
GLS315	296	300	40~80	15~35	Depending on the length
GLS400	396	300	40~80	30~60	Depending on the length

 

Our service:
Training & Service
Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment, according to your special demand.

Sale services: servant
Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

Welcome to visit our company and workshop, we sincerely look forward to cooperating with you. We will provide you with the most suitable products with the reasonable price.