| Customization: | Available |
|---|---|
| Application: | Construction |
| Certification: | ISO |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Good Production Cement Turnkey Plant
|
Name of item |
|
Machinery equipments |
|
1. Limestone crushing & conveying |
|
2. Clay crushing & conveying |
|
3. Clay & iron powder pre-homogenization pile |
|
4. Limestone pre-homogenization pile |
|
5. Raw material dosing station |
|
6. Raw material grinding & exhaust gas treatment |
|
7. Raw meal homogenization silo & feeding kiln |
|
8. Clinker cooler( kiln rear burning) |
|
9. Rotary kiln & triple air duct |
|
10. Kiln head & clinker conveying |
|
11. Raw coal crushing & conveying |
|
12. Raw coal pre-homogenization pile & conveying |
|
13. Coal powder preparation & conveying |
|
14. Clinker, gypsum storage & dosing & conveying |
|
15. Gypsum crushing & conveying |
|
16. Cement grinding & conveying |
|
17. Cement storage & bulk loading |
|
18. Cement packing & conveying |
|
19. Chemical laboratory equipment |
|
Electrical, automation, communication & motive equipments |
|
1. DCS central control |
|
2. The gross reducing voltage station |
|
3. Substation for limestone crushing |
|
4. Electric room for cement packing |
|
5. Electric room for raw meal mill |
|
6. Electric room for kiln rear |
|
7. Electric room for kiln head |
|
8. Electric room for cement grinding |
|
9. Total flat surface for electric |
|
10. Compressed air station and piping net |
|
11. Oil pump house |
|
12.Ventilation and air conditioner for whole factory |
|
13. Electric wire , cable & etc. |
|
Building material of stove |
|
Heat insulting material |
|
Water supply and drainage equipments |
|
Non-standard materials |
|
Design fee |
|
Installation fee |
|
Fee of technical service (Cost during installation and debugging) |
|
Guidance fee of technical experts for test run |
Cement Machinery Used in Energy saving cement production plant
In a cement making plant, not only the crushing machinery, but also the grinding machines are used as cement machinery.
• Limestone crusher: limestone is the main raw material for making cement, so we need the limestone crusher to crush limestone to small particle sizes to make cement.
• Raw mill: it is used to crush limestone particles and additive materials.
• Coal crusher and coal mill: They are used for crushing and grinding coal into powder in cement plant.
• Gypsum crusher and mill: In cement plant, they are used for crushing and grinding gypsum into powder.
• Cement mill: They are used to grind cement clinker into powder to make cement.
Features of Energy saving cement production plant
♦ Full specifications, large model.
♦ Planing of steel plate and overall annealing of cylinder eliminate welding stress and prevent deformation.
♦ Green technology.
♦ Air leakage coefficient can be controlled at 15% or less.
♦ The system uses full negative pressure operation, soot emissions is below the national environmental emissions standards.
♦ Advanced automatic control system, which consists of base control systems and process automation control system, reliable and stable.
Techinical Parameter of cement kiln
| spec | technical parametere | speed reducer | motor | supporting quantity | |||
| (m) | rev | slope | output | type | type | power | |
| (r/min) | (%) | (t/h) | (KW) | ||||
| Φ1.6x32 | 0.58~2.85 | 4 | 2 | ZQ75-50 | YCT250-4A | 18.5 | 3 |
| Φ1.6/1.9x36 | 0.53~1.59 | 4 | 2.5~3 | ZQ110-7 | YCT250-4B | 22 | 3 |
| Φ1.9x39 | 0.53~1.59 | 4 | 3~3.4 | ZQ125-7 | YCT315-4A | 37 | 3 |
| Φ2.2x45 | 0.214~1.64 | 3.5 | 4~5 | main:ZS125-5 | YCT315-4B | 45 | 3 |
| auxiliary:ZQ40-40 | Y112M-4 | 4 | |||||
| Φ2.5x50 | 0.62~1.5 | 3.5 | 5~6 | main:ZS165-5 | YCT355-4A | 55 | 3 |
| auxiliary:ZS50-1 | Y160M-6 | 7.5 | |||||
| Φ2.5x55 | 0.62~1.5 | 3.5 | 5~6 | main:ZS165-5 | YCT355-4A | 55 | 3 |
| auxiliary:ZS50-1 | Y160M-6 | 7.5 | |||||
| Φ2.8x55 | 0.62~1.5 | 3.5 | 6~7 | main:ZS165-6 | YCT355-4B | 75 | 3 |
| auxiliary:ZS50-1 | Y160L-6 | 11 | |||||
| Φ3.0x60 | 0.5~1.5 | 3.5 | 7~9 | main:ZS165-3 | ZSN-280-11B | 125 | 4 |
| auxiliary:ZS50-1 | Y160L-6 | 11 | |||||
| Φ3.2x64 | 0.4~1.5 | 3.5 | 8~10 | main:ZL130-16 | ZSN-280-11B | 190 | 4 |
| auxiliary:ZL50-10 | Y180L-4 | 22 | |||||
| Φ3.5x70 | 0.4~1.5 | 3.5 | 12~14 | main:ZSY500-40 | ZSN-315-082 | 280 | 4 |
| auxiliary:ZL50-14 | Y180L-4 | 22 | |||||
| Φ4x80 | 0.4~1.5 | 3.5 | 16~20 | main:ZSY630-35.5 | ZSN-315-12 | 355 | 4 |
| auxiliary:ZSY280-35.5 | Y200L-4 | 30 | |||||
We offer onestop service for you, including designing, building, suitable equipment providing, installing and debugging, technical serving, and overall contracting. And we have successfully finished the construction of cement production lines of 4000t/d, 3000t/d, 2500t/d, 1500t/d, 600t/d, 300t/d. china complete cement machine,cement mill,cement production line
){kind=link}