Customization: | Available |
---|---|
Certification: | CE, ISO |
Place Style: | Horizontal |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Well Designed Rotary Kiln Used in Cement and Mg Plant
Application
Rotary kiln for cement and lime production line is thermal equipment to heat materials. It is widely used in the fields of cement, nonferrous metallurgy, ferrous metallurgy, refractory material, chemical, and making-paper.
Introduction
Our company produces other kilns with the diameter1-5 meters, widely applies in the metallurgy, the chemical industry, bears professions and so on material, Ceram site, papermaking. This kind of kiln's supporting is divided into two forms of rolls and skids, the transmission may use direct-current or the exchange frequency conversion velocity modulation, and has many kinds of form seals to adapt the different operating mode.
Our company could also meet different needs from different customer to produce Non-standard kiln.
Rotary kiln is composed of cylinder, gears, supports device, kiln liner and kiln tail sealing equipment, kiln head hood, and combustion.
Cylinder as heated pivoting part, made of high-quality carbon steel plate, is supported on the first or some gear in order to control the turning of cylinder. Gearing gyrate according to process-required rotating speed by ring gear in the middle of cylinder. Because of the need of installation or maintenance, bigger rotary kiln has auxiliary gears, which makes cylinder gyrate more slowly. To prevent cold air come in and dust overflow, the reliable kiln tail and head sealing equipment is installed on feed and discharge end.
Product feature
1. Support device: advanced shaft structure, automatic temperature measuring device and electrical heating.
2. Catch wheel: including two kinds mechanical wheel and hydraulic pressure.
3. Gears: single or double. Control the rotating speed by variable motor, DE machine and frequency variable motor. Be reliable, energy -saving, and efficient.
4. Cylinder tyre bolster: lower bolster has three types: fixed, zoom and floating. The structure is simple, replacement is convenient and won't hurt cylinder.
5. Sealing equipment: there are many kinds for choice according to kiln models, including air cylinder edge sealing, spring edge sealing, and graphite block sealing and combination for above. The feather is adaptive for cylinder rotating and swing. And sealing effect is very good.
6. Kiln head hood: including stationary type and flexible type.
No. | Model | Capacity (t/h) | Revolving speed(RPM) | Support | Power (KW) | Weight (t) | Remark |
1 | Φ1.6×32m | 2 | 0.58-2.85 | 3 | 18.5 | 46.8 | |
2 | Φ1.6/1.9×36m | 2.5-3 | 0.53-1.59 | 3 | 22 | 57 | |
3 | Φ1.9×39m | 3-3.4 | 0.53-1.59 | 3 | 37 | 71.79 | |
4 | Φ2.2×45m | 4-5 | 0.214-1.64 | 3 | 45 | 142.6 | |
4 | |||||||
5 | Φ2.5×40m | 6.3 | 0.62-1.5 | 3 | 55 | 160 | preheater kiln |
7.5 | |||||||
6 | Φ2.5×50m | 5-6 | 0.62-1.5 | 3 | 55 | 175 | |
7.5 | |||||||
7 | Φ2.5×55m | 5-6 | 0.62-1.5 | 3 | 55 | 180 | |
7.5 | |||||||
8 | Φ2.7×42m | 13 | 0.6-2.3 | 3 | 55 | 190 | preheater kiln |
11 | |||||||
9 | Φ2.7×44m | 13 | 0.74-2.21 | 3 | 55 | 193 | preheater kiln |
11 | |||||||
10 | Φ2.8×42m | 14 | 0.5-2.503 | 3 | 55 | 195 | preheater kiln |
7.5 | |||||||
11 | Φ2.8×43m | 8.3 | 0.62-1.5 | 3 | 75 | 198 | preheater kiln |
11 | |||||||
12 | Φ2.8×55m | 6-7 | 0.62-1.5 | 3 | 75 | 215.6 | |
11 | |||||||
13 | Φ3×48m | 700 | 0.67-3.76 | 3 | 110 | 251 | decompose outside |
18.5 | |||||||
14 | Φ3.0×50m | 9.2 | 0.5-1.5 | 3 | 125 | 255 | preheater kiln |
11 | |||||||
15 | Φ3×60m | 7-9 | 0.5-1.5 | 3 | 125 | 270 | |
11 | |||||||
16 | Φ3×88m | 12.5 | 0.444-1.345 | 5 | 110 | wet kiln | |
11 | |||||||
17 | Φ3×100m | 11-13.5 | 0.47-1.48 | 5 | 90 | wet kiln | |
11 | |||||||
18 | Φ3.2×48m | 0.788-3.88 | 3 | 125 | |||
11 | |||||||
19 | Φ3.2×50m | 12.5 | 0.4-1.5 | 3 | 125 | preheater kiln | |
22 | |||||||
20 | Φ3.2×50m | 12.5 | 0.788-3.938 | 3 | 160 | decompose outside | |
15 | |||||||
21 | Φ3.2×64m | 8-10 | 0.4-1.5 | 4 | 190 | 337.8 | |
22 | |||||||
22 | Φ3.2×118m | 17 | 0.292-1.459 | 6 | 110 | wet kiln | |
11 | |||||||
23 | Φ3.3×50m | 13 | 0.36-3.57 | 3 | 160 | decompose outside | |
11 | |||||||
24 | Φ3.3×50m | 13 | 0.36-3.57 | 3 | 160 | 288 | preheater kiln |
11 | |||||||
25 | Φ3.3×52m | 13 | 0.67-3.43 | 3 | 160 | 290 | decompose outside |
11 | |||||||
26 | Φ3.3×54m | 14 | 0.92-2.74 | 3 | 125 | 292 | preheater kiln |
11 | |||||||
27 | Φ3.5×54m | 14 | 0.55-3.5 | 3 | 220 | decompose outside | |
18.5 | |||||||
28 | Φ3.5/3×60m | 14-16 | 0.39-1.95 | 4 | 110 | hollow waste heat | |
11 | |||||||
29 | Φ3.5×70m | 12-14 | 0.4-1.5 | 4 | 280 | 394.6 | |
22 | |||||||
30 | Φ3.5×125m | 21.8 | 0.281-1.406 | 5 | 2×90 | wet double drive | |
2×11 | |||||||
31 | Φ3.5×130m | 22 | 0.439-1.379 | 5 | 2×90 | wet double drive | |
2×5.5 | |||||||
32 | Φ3.5×145m | 25 | 0.345-1.379 | 6 | 2×90 | wet double drive | |
2×5.5 | |||||||
33 | Φ3.6×55m | 16.7 | 0.4-1.5 | 3 | 250 | preheater kiln | |
22 | |||||||
34 | Φ3.6×74m | 20.5 | 0.222-1.666 | 4 | 132 | hollow waste heat | |
11 | |||||||
35 | Φ3.8×58m | 20.8 | 0.4-1.5 | 3 | 250 | preheater kiln | |
22 | |||||||
36 | Φ3.95×56m | 0.6-3.3 | 3 | 250 | decompose outside | ||
15 | |||||||
37 | Φ4.0×60m | 25 | 0.4-1.5 | 3 | 315 | 470 | preheater kiln |
30 | |||||||
38 | Φ4×60m | 25 | 0.58-3.459 | 3 | 250 | 470 | decompose outside |
15 | |||||||
39 | Φ4×80m | 16-20 | 0.4-1.5 | 4 | 355 | 564.8 | |
30 | |||||||
40 | Φ4×80m | 29.17 | 0316-1.582 | 4 | 160 | hollow waste heat | |
15 | |||||||
41 | Φ4/3.5/4×150m | 30.42 | 0.343-1.714 | 6 | 2×125 | wet double drive | |
2×11 | |||||||
42 | Φ4×150m | 33.3 | 0.509-1.528 | 6 | 2×125 | wet double drive | |
2×11 | |||||||
43 | Φ4×150m | 30-34 | 0.402-1.587 | 6 | 280 | wet single drive | |
30 | |||||||
44 | Φ4.7×72m | 0.35-3.5 | 3 | 550 | decompose outside | ||
30 |
Packing:
ZK CORP will make proper packing for different machine, which is suitable for sea transport and land transport.
Main part will be in nude. Small parts will be packed in wooden box.
Transport:
1. ZK CORP can afford transport directly to destination port or destination place.
2. Customer can arrange both land transport and sea transport by themselves if convenient.
Pre-sale services
Act as a good adviser and assistant of you; enable you to get rich and generous returns on your investments;
1. Select equipment model;
2. Design and manufacture products according to clients' special requirement;
3. Train technical personnel for clients
Services during the sale
Respect your requirement; devote ourselves to improving the total value of yours.
1. Pre-check products before of delivery;
2. Help you to draft solution.
After-sales service
Provide considerate services to minimize your worries.
1. Assist you to prepare for the first construction scheme;
2. Install and debug the equipment;
3. Train the first-line operators on site;
4. Examine the equipment regularly;
5. Take initiative to eliminate the troubles rapidly at site;
6. Distribute the guarantee fittings door-to-door;
7. Provide perfect service;
8. Provide technical exchanging;
9. Provide maintenance for big items.