| Customization: | Available |
|---|---|
| Type: | Bucket Conveyor |
| Structure: | Chain Conveyor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Introduction of NE Bucket Elevator
Structure of chain bucket elevator :
1. Buckets to contain the material;
2. A belt to carry the buckets and transmit the pull;
3. Means to drive the belt;
4. Accessories for loading the buckets or picking up the material, for receiving the discharged material, for maintaining the belt tension and for enclosing and protecting the elevator.
Vertical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Inclined elevators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don't depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower.
Nearly all centrifugal discharge elevators have spaced buckets with rounded bottoms. They pick up their load from a boot, a pit, or a pile of material at the foot pulley.
The buckets can be also triangular in cross section and set close to on the belt with little or no clearance between them. This is a continuous bucket elevator. Its main use is to carry difficult materials at slow speed.
Lifting bucket elevator's parameters:
| model | Type | Transmission capacity | Hopper | The propeller shaft speed | The largest block of conveying material | Lifting height | |||||
| Capacity (L) | Bucket distance | bucket width | Running speed | (r/min) | (m) | ||||||
| Deep bucket | Shallow bucket | (mm) | (mm) | (r/min) | (mm) | ||||||
| Deep bucket | Shallow bucket | ||||||||||
| D160 | Tape | 8 | 31 | 1.1 | 0.65 | 300 | 160 | 1 | 47.5 | 25 | 4.82 ~ 30.02 |
| D250 | Tape | 21.6 | 11.8 | 32 | 2.6 | 400 | 250 | 1.25 | 47.5 | 35 | 4.48 ~ 30.08 |
| D350 | Tape | 42 | 25 | 7.8 | 7 | 500 | 350 | 1.25 | 37.5 | 45 | 4.3 ~ 30.3 |
| D450 | Tape | 69.6 | 48 | 15 | 14.5 | 640 | 450 | 1.25 | 37.5 | 55 | 4.54 ~ 34 |
| HL160 | Ring chain centrifugal | 6 | 22 | 1.1 | 0.65 | 400 | 160 | 0.87 | 47.5 | 25 | 4.84 ~ 30.02 |
| HL250 | Ring chain centrifugal | 14 | 6.8 | 3.2 | 2.6 | 500 | 250 | 0.87 | 47.5 | 35 | 4.84 ~ 30.08 |
| HL300 | Ring chain centrifugal | 28 | 16 | 5.2 | 4.4 | 500 | 300 | 1.25 | 37.5 | 40 | 4.66 ~ 30.16 |
| HL400 | Ring chain centrifugal | 47.2 | 30 | 10.5 | 10 | 600 | 400 | 1.25 | 37.5 | 50 | 4.52 ~ 30.32 |
){kind=link}