High Quality Rotary Kiln Dryer Sale Medium Rotary Dryer Clay Rotary Drum Dryer
HENAN ZHENGZHOU MINING MACHINERY CO., LTD was founded in 1956, after more than half a century of development, has now become a domestic first-class modern machinery manufacturing enterprises. Product marketing at home and abroad.
Drier Introduction:
Drier is mainly used for drying wet materials in building construction, metallurgy, chemical industries, and it can dry various materials with strong adaptability. Besides, it is common drying device in cement plant with simple and reliable operation.
In our company, this series applies the new type scatter plate device; It can guide direction, flow on an average and scatter the material and so on. And it can make the material in the thin, average and complete condition. Contact the heat airflow completely and use the heat energy fully. Moreover, it adopts reasonable operational parameter, and compared with general drier, it reduce the coal and power consumption above10-15%, and increase the output above10-15%. At present, it is widely used in cement and mining industries.
Working principle:
It mainly consists of revolution body, raise material board, transmission device, supportive device and sealing ring, etc.
The heat sources of the drier is from the combustion train, and is adopts down-flow heating methods. When the materials enter into the body from the feeding device, it will be pushed back by the spire raising board. As the drier is in an inclined position, the materials will be down to the lower end under the influence of gravity and rotation, but the raising board will be threw to the upper end for scattering. This procession makes the material well-distributed in the body, and then ensure the heat exchange with the heat wind. After repeated cycle with this procession, the moisture content will be dried.
Features and Benefits:
Reasonable design of raising board and angle ensure the material well-distributed and dry with less times, it has reliable operation and high energy utilization ratio, simple maintenance.
Adopt an adjustable center tug structure, the good cooperation of the tug and the rolling ring reduce the attrition and energy consumption.
The special structure of the dam-wheel decrease the horizontal thrust, when the machine working in inclination station, it has strong ability of anti-overloading, steady operation and high reliability.
High temperature resistance, it can use the high temperature to dry the material quickly,
Large capacity, few fuel consumption, low drying cost.
Company Name: Henan Zhengzhou Mining Machinery Co., Ltd.
Official Website: http://hnzkjq.en.made-in-china.com/ & http://hnzkjq.en.made-in-china.com/
24-hour Free Sales Consulting Phone: 0086-371 -5590 2866.
Company Address: Qiaolou caizhai industrial estate, Xingyang city, Henan Province
Please pay attention to the company's other products:
Price of rotary kiln: http://hnzkjq.en.made-in-china.com
Rotary Kiln: http://hnzkjq.en.made-in-china.com
Preheater: http://hnzkjq.en.made-in-china.com
Cement Mill: http://hnzkjq.en.made-in-china.com
Rotary Dryer: http://hnzkjq.en.made-in-china.com
Raw Mill: http://hnzkjq.en.made-in-china.com
Ball Mill: http://hnzkjq.en.made-in-china.com
| specification |
cylinder |
C apacity(t/h) |
motor |
P ower(kw) |
reducer |
| D(mm) |
L(mm) |
S lope(°) |
S peed(rpm) |
model |
| 1212 |
1200 |
12000 |
1.8 |
5 |
2-5 |
Y160LM-6 |
11 |
ZQ500 |
| 1515 |
1500 |
15000 |
1.8 |
4.28 |
4-5 |
Y160L-6 |
18.5 |
ZQ650 |
| 1818 |
1800 |
18000 |
1.8 |
5 |
6-8 |
Y200LI-6 |
22 |
ZA650 |
| 2020 |
2000 |
20000 |
2.0 |
3.28 |
7-10 |
Y200L2-6 |
30 |
ZQ650 |
| 2222 |
2200 |
22000 |
1.8 |
2.8 |
9-14 |
Y250M-6 |
45 |
ZQ650 |
| 2424 |
2400 |
24000 |
2.5 |
2.82 |
14-16 |
Y280S-6 |
55 |
ZQ750 |
| 2626 |
2600 |
26000 |
2.5 |
2.58 |
16-18 |
Y280M-6 |
75 |
ZQ850 |
| 2828 |
2800 |
28000 |
2.5 |
2.55 |
20-22 |
Y315S-6 |
90 |
ZL115 |
| 3030 |
3000 |
30000 |
2.5 |
2.69 |
22-24 |
Y315L1-6 |
132 |
ZL130 |
| 3232 |
3200 |
32000 |
2.5 |
2.6 |
24-26 |
Y315M-4 |
200 |
ZSY450 |
| 3434 |
3400 |
34000 |
2.5 |
2.51 |
26-28 |
Y315L2-4 |
315 |
ZL130 |
| 3634 |
3600 |
36000 |
2.5 |
2.51 |
30-40 |
Y315L2-4 |
315 |
ZL130 |
| 4040 |
4000 |
40000 |
2.5 |
2.09 |
40-45 |
YKK4003-4 |
400 |
ZSY630 |
| 4242 |
4200 |
42000 |
2.5 |
2.09 |
45-46 |
YKK4005-4 |
400 |
ZSY630
|
FAQ:
Q: Are you a factory or a trading company?
A: We are factory manufacturing packaging machines and we provide perfect OEM and after-sale service.
Q: Can you send me the video to show how the machine works?
A: Certainly, we have made video of every machine and uploaded them to Youtube.
Q: What should I take care when using the machine?
A: Keep the machine away from thinner and other chemical liquid.
Q: How to maintain the machine?
A: Check the connection part and clean the screen frame regularly.
Q: How can I pay my order?
A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.
Q: Do you have a CE certificate?
A: For every model of machine, it has a CE certificate.
Our service: Training & Service
Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment, according to your special demand.
Sale services: servant
Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
After-sale services: faithfulness
To establish long term friendship, we will regularly pay return visit to customers.
In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
Welcome to visit our company and workshop, we sincerely look forward to cooperating with you. We will provide you with the most suitable products with the reasonable price.
Audited Supplier 
){kind=link}