| Model: | Φ1.2×12 |
|---|---|
| Object: | Sludge |
| Voltage: | 380V |
| Drum diameter: | Φ1200mm |
| Certification: | ISO9001:2000, CE, ISO9001:2008 |
| Energy Saving: | Energy Saving |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier ZK rotary dryer with more than 50 years experience, professional technology support and all-around service can be offered to you.
The Sewage Sludge Dryer is mainly for drying the small size raw material less than 30mm, the moisture content less than 75%.
Firstly, The Sewage Sludge enters into the drying sysem by conveyor or bucket conveyor, the sewage sludge raised by lifting plate to make the sewage sludge and heat totally contact with each other.
The sewage sludge are evenly distributed in Sewage Sludge Dryer cylinder, at the start of the Sewage Sludge Dryer and the end of the Sewage Sludge Dryer have temperature detector, so that you can check everywhere temperature inside the Sewage Sludge Dryer.
After the Sewage Sludge Dryer have fan, it will absorb the hot air into the dryer and finally make the material to dry.
Between the Sewage Sludge Dryer and fan have cyclone, it can collect the dust from the Sewage Sludge Dryer machine.
Sewage Sludge Dryer is consist of heating device, feeding device, transport device, discharge device, dust extraction device and other connecting parts. For the installation process, the Sewage Sludge Dryer should slopes slightly so that the discharge end of Sewage Sludge Dryer is lower than the material feed end in order to convey the material through the Sewage Sludge Dryer under gravity. Material to be dried enters the Sewage Sludge Dryer, and as the Sewage Sludge Dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the Sewage Sludge Dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of Sewage Sludge Dryer, passing through the hot gas stream as it falls.
Main Technical Parameters:
|
Specific-ations(m) |
Capacity(t/h) |
Main motor |
Main gear box |
Weight(t) |
||
|
Power(kw) |
Model |
Model |
Speed reduction ratio |
|||
|
Ø1.2*10 |
2.5 |
7.5 |
Y160M-R3 |
ZL50-16-I |
----- |
13.5 |
|
Ø1.5*12 |
3.3-4.9 |
10 |
Y160L-6-B3 |
JZQ500-III-2F |
----- |
18.9 |
|
Ø1.5*15 |
4-6 |
18.5 |
Y200L1-6 |
JZQ500-III-2F |
----- |
21 |
|
Ø1.8*12 |
4-6 |
18.5 |
Y160L-6 |
ZQ50-16II-2 |
16.46 |
22.83 |
|
Ø2.2*12 |
7-12 |
18.5 |
Y200L7-6 |
JZQ650-III |
31.5 |
37.6 |
|
Ø2.2*14 |
7-12 |
22 |
Y200L7-6 |
JZQ650-III |
31.5 |
40 |
|
Ø2.2*16 |
12 |
30 |
Y225M-6 |
JZQ750-III |
31.5 |
45 |
|
Ø2.4*14 |
12 |
30 |
Y250M-6 |
JZQ750-III |
31.5 |
51 |
|
Ø2.4*18 |
10-13 |
37 |
Y250M-6 |
ZL85-13-I |
27.16 |
54 |
|
Ø2.4*20 |
10-14 |
37 |
Y250N-6 |
ZL85-13-I |
27.16 |
54.14 |
|
Ø3*20 |
25 |
55 |
Y250M-4 |
ZL100-16-I |
41.52 |
78 |
|
Ø3*25 |
32-36 |
75 |
YR280M-4 |
ZL100-16-I |
41.52 |
104 |
Company Information:
Henan Zhengzhou Mining Machinery Co., Ltd ( ZK Corp.) is located in Wulong Industrial Park of Zhengzhou Xingyang which is the capital of Henan Province. It is at the junction of 310 State Road and Xingmi Road, close to the highway, railway station, West Zhongyuan Road, downtown area of Zhengzhou and Zhengzhou International Airport. The transportation condition is very convenient.
The main products of our company include: ball mill, rotary kiln, vertical preheater, cooler, rotary dryer,jaw crusher, coal burner, magnetic separator, flotation machine, classifier, feeder, bucket elevator, dust collector, belt conveyor, ceramic sand granulator and other equipment relate to metallurgy, cement, lime, mineral processing, magnesium production, refractory, chemical industry, etc. The products of our company have been sold to every province of China and exported to Russia, Korea, Vietnam, Malaysia, Nepal, Bangladesh, Mexico, Armenia, Africa, South America and other countries and regions.
Our service:
Pre-sale Service :
1. Determine your needs and expectations through positive communication, active advice, and visit arrangement;
2. Provide you with necessary preliminary design information, bidding documents or quotation sheet based on your needs and expectations;
3. Provide you with technical solutions and help you determine;
4. Provide you with draft contract and technology agreements;
5. Meet requirements and needs of your bidding documents or other means;
6. Other services before signing contract;
7. Contract evaluation and contract signing.
After-sale Service:
1. Select excellent installation team or installation service personnel for you;
2. Provide you with operating and training services;
3. Help with the equipment commissioning, and solve problems in trial operation;
4. Check and acceptance service for single equipment or a whole production line;
5. Service items including follow-up visit, customer satisfaction surveys and so on;
6. Timely provide you with necessary accessories after acceptance;
7. Provide you with warranty services of repair, replacement and refund if conditions are fulfilled.
8. Help you solve other problems.
FAQ:
How to choose the right type of rotary dryer?
The following factors need to be taken into consideration: the feeding size, raw
Material, water content percentage, production capacity, power, working hour, etc.
We have professional sales manager and engineers who can help you to decide the type.
What about price of rotary dryer?
Different models of rotary dryer have different prices. We will give you the most favorable price. Discount is negotiable.
How about the after-sale installation of rotary dryer?
Our engineers are available to help you install rotary dryer onsite.
We also can offer commissioning and operation training service.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}